BASIC ASSEMBLY

TRUSS FRAME HEAD SECTION

 

Standard Head Section includes head pulley, head bearings,head shaft and drive.

Drive includes electric motor, torque arm reducer, sheaves,
v-belts, motor mount and drive guard.
These elements are all shop mounted on a rigid truss frame steel head section.

Head section measures 2 feet from the center line of the head pulley to the flange connection.


TRUSS FRAME TAIL SECTION

Standard Tail Section is built up and shipped completely assembled and includes self-cleaning wing type tail pulley, tail shaft and screw type take-up bearing.

Troughing idlers are closely spaced on the tail section to prevent belt sag at the loading point and a heavy duty loading hopper is furnished to prevent spillage.
Tail section measures 8 ft. from centerline of pulley to the flange connection.


TRUSS FRAME INTERMEDIATE SECTION

Standard Intermediate Section includes heavy duty troughing idlers and return idlers shop mounted on a rigid truss frame. Intermediate section are available in standard
20 ft. and 10 ft. long from flange to flange.


TRUSS FRAME HEAD, TAIL AND INTEMEDIATE SECTION ARE AVAILABLE ON WIDTHS OF 24", 30", 36" , 42" 48" and 60" INCHES AND ON 24", 30", 42" AND 48" INCH DEEP TRUSS.


For Additional Information about our products or any other question please call to:

(913) 342-2240

For Additional Information about our products or any other question please call to: (913) 342-2240

SAND - GRAVEL - CRUSHED ROCK-STONE - CEMENT - AND ASPHALT
INDUSTRIES.


Home - Contact Us - About Us - Pre-Engineering Equipment - Custom Engineering